step 1
Download ROM-flashing tools
1. Unzip the original pack GOT and put it into a root directory of a certain disk backup (the path and SBF name cannot include Chinese)
2. Unzip RSD Lite 4.6 on the computer and install it.
3. Unzip Milestone driver on the computer and install it.
4. Put update.zip and OpenRecovery folders obtained from the decompression of OpenRecovery into the root directory of your SD card in your phone. Please do not delete or rename them.
Download now (Size:128MB, MD5:A44119C147578086A0DF097F5D15212E)
step 2
Download the latest [You must be registered and logged in to see this link.] or [You must be registered and logged in to see this link.] and directly put it into the folder of SD card / OpenRecovery / updates in your phone without unzipping.
step 3
Shut down your phone and pull up the screen to open the keyboard. Press UP and POWER and let go after about five seconds, then the screen will enter into the interface of bootloader.
step 3
Connect your phone and computer with USB, and wait patiently until the driver is installed automatically.
step 4
Open the RSD software downloaded before, click "Choose File" button (as shown in the picture below) to find out the location of the file where SBF is placed, check the file and confirm.
step 5
When RSD interface displays information, click "START". Please be patient because your phone may automatically restart twice until the RSD interface shows "PASS", which means you have completed flashing the bottom package.
step 6
Shut down your phone and pull up the screen to open the keyboard to check the version number. Hold down UP and POWER to enter the bootloader interface, and the screen displays the version number 90.75 or 90.78 on the upper side.
step 7
Enter Recovery, shut down the phone:
90.75 Series Version: Hold down PHOTO and POWER until the symbol moto appears. Wait until a yellow exclamation mark appears.
90.78 Series Version: You need to hold down the X and POWE of the physical keyboard until the symbol moto appears, Wait until a yellow exclamation mark appears.
First hold down "VOLUME UP" and then CAMERA to enter the Recovery list.
step 8
Flashing OpenRecovery
Open the keyboard and use the DIRECTION key to select "apply sdcard: update.zip"
step 9
Ok, did everything went correctly??? If so, then u will see a menu.
1. now go to nanadroid > Backup > Backup all
{just backup your phone, incase you mess up or you wanna role back}
step 10
After entering OpenRecovery, use the DIRECTION key to select "wipe data/factory reset" and choose “yes”.
step 11
Chose yes-delete all data
step 12
Refresh the interface again to return to the main interface of OpenRecovery, use the DIRECTION key to select "apply update", choose and click the ROM package downloaded before.
step 13
Use the DIRECTION key to select and click "yes", and then the progress bar of flashing ROM is displayed.
step 14
When the progress bar completes and the clue of "install from sdcard complete" appears at the bottom of the interface, it means that you have finished flashing ROM.
step 15
Use the DIRECTION key to select and click "go back", then select and click "Reboot System", your phone will restart. When you see the exclamatory mark, please press VOLUME UP and PHOTO to back to Recovery. Select and click "Reboot System now".
Download ROM-flashing tools
1. Unzip the original pack GOT and put it into a root directory of a certain disk backup (the path and SBF name cannot include Chinese)
2. Unzip RSD Lite 4.6 on the computer and install it.
3. Unzip Milestone driver on the computer and install it.
4. Put update.zip and OpenRecovery folders obtained from the decompression of OpenRecovery into the root directory of your SD card in your phone. Please do not delete or rename them.
Download now (Size:128MB, MD5:A44119C147578086A0DF097F5D15212E)
step 2
Download the latest [You must be registered and logged in to see this link.] or [You must be registered and logged in to see this link.] and directly put it into the folder of SD card / OpenRecovery / updates in your phone without unzipping.
step 3
Shut down your phone and pull up the screen to open the keyboard. Press UP and POWER and let go after about five seconds, then the screen will enter into the interface of bootloader.
step 3
Connect your phone and computer with USB, and wait patiently until the driver is installed automatically.
step 4
Open the RSD software downloaded before, click "Choose File" button (as shown in the picture below) to find out the location of the file where SBF is placed, check the file and confirm.
step 5
When RSD interface displays information, click "START". Please be patient because your phone may automatically restart twice until the RSD interface shows "PASS", which means you have completed flashing the bottom package.
step 6
Shut down your phone and pull up the screen to open the keyboard to check the version number. Hold down UP and POWER to enter the bootloader interface, and the screen displays the version number 90.75 or 90.78 on the upper side.
step 7
Enter Recovery, shut down the phone:
90.75 Series Version: Hold down PHOTO and POWER until the symbol moto appears. Wait until a yellow exclamation mark appears.
90.78 Series Version: You need to hold down the X and POWE of the physical keyboard until the symbol moto appears, Wait until a yellow exclamation mark appears.
First hold down "VOLUME UP" and then CAMERA to enter the Recovery list.
step 8
Flashing OpenRecovery
Open the keyboard and use the DIRECTION key to select "apply sdcard: update.zip"
step 9
Ok, did everything went correctly??? If so, then u will see a menu.
1. now go to nanadroid > Backup > Backup all
{just backup your phone, incase you mess up or you wanna role back}
step 10
After entering OpenRecovery, use the DIRECTION key to select "wipe data/factory reset" and choose “yes”.
step 11
Chose yes-delete all data
step 12
Refresh the interface again to return to the main interface of OpenRecovery, use the DIRECTION key to select "apply update", choose and click the ROM package downloaded before.
step 13
Use the DIRECTION key to select and click "yes", and then the progress bar of flashing ROM is displayed.
step 14
When the progress bar completes and the clue of "install from sdcard complete" appears at the bottom of the interface, it means that you have finished flashing ROM.
step 15
Use the DIRECTION key to select and click "go back", then select and click "Reboot System", your phone will restart. When you see the exclamatory mark, please press VOLUME UP and PHOTO to back to Recovery. Select and click "Reboot System now".